This add-on to the main AutoScannerOpelCAN software is capable to reflash various Opel ECUs. The tool is useful for engine ECU chiptuning, restoring damaged firmware, programming new ECUs. The software works with the same hardware, as used by AutoScannerOpelCAN sofware, and requires an additional security dongle. The software is splitted into the modules, so you can choose and order only those module licenses, which are necessary in your work. New licenses can be added later via the internet.
Simtec MS70: reading, writing;
Simtec MS71 (Z18XE and Z22XE): reading, writing;
Simtec MS71 (Y22XE): only writing;
Simtec MS71.5: reading, writing;
Simtec МS71.6: reading, writing;
Simtec МS81: reading, writing;
Simtec МS75.1: reading, writing;
Simtec МS75.5: reading, writing.
Simtec MS70: reading, writing;
Simtec MS71 (Z18XE and Z22XE): reading, writing;
Simtec MS71 (Y22XE): only writing;
Simtec MS71.5: reading, writing;
Simtec МS71.6: reading, writing;
Simtec МS81: reading, writing;
Simtec МS75.1: reading, writing;
Simtec МS75.5: reading, writing.
Bosch ME1.5.5: reading, writing;
Bosch ME7.6.1 (KWP): only writing;
Bosch ME7.6.2 (CAN): reading, writing;
Bosch ME7.9.9 (CAN): reading, writing;
Bosch M3.1.1: reading, writing;
Bosch MЕ3.1.1 CAN: only writing.
Bosch ME1.5.5: reading, writing;
Bosch ME7.6.1 (KWP): only writing;
Bosch ME7.6.2 (CAN): reading, writing;
Bosch ME7.9.9 (CAN): reading, writing;
Bosch M3.1.1: reading, writing;
Bosch MЕ3.1.1 CAN: only writing.
Multec HSFI C, Multec HSFI 2.0, Multec HSFI 2.1, Multec HSFI 2.4, Multec HSFI 2.5: reading, writing.
Multec HSFI C, Multec HSFI 2.0, Multec HSFI 2.1, Multec HSFI 2.4, Multec HSFI 2.5: reading, writing.
MT35E (CAN), Multec H (Z16XE OVC): reading, writing.
MT35E (CAN), Multec H (Z16XE OVC): reading, writing.
PSG16 KWP, PSG16 CAN: only writing;
+ a complete set of the latest firmware.
PSG16 KWP, PSG16 CAN: only writing;
+ a complete set of the latest firmware.
ACDelco E83 (A16XER): reading, writing of the map area.
ACDelco E83 (A16XER): reading, writing of the map area.
ACDelco E78 (A14NET): reading, writing of the map area.
ACDelco E78 (A14NET): reading, writing of the map area.
ACDelco E39 LDK (A20NHT): reading, writing of the map area.
ACDelco E39 LDK (A20NHT): reading, writing of the map area.
ACDelco E38 Chevrolet Tacho): reading, writing of the map area.
ACDelco E38 Chevrolet Tacho): reading, writing of the map area.
Astra J/Chevrolet Cruze TCU: FULL reading, writing.
Astra J/Chevrolet Cruze TCU: FULL reading, writing.
Openport 2.0
The OpenPort 2.0 is tuning tool hardware that is capable of communicating with a most OBDII compliant vehicles using a standard J2534 interface. Combined with EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles. A USB cable is included with each OpenPort, which is all the hardware you will need unless you have one of the few vehicles that require a separate reflash adapter. For Subaru you will only need a reflash adapter for the 2001 through 2005 WRX, but not STi, unless you are working on an early non USDM STi in which case you may need one of our WRX adapters. No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models. For Mitsubishi, you will need the adapter for most pre CAN vehicles which include the 5-9 Evo. Choose the adapter you need from the ’Reflash Adapters’ list below.
Technical Details
It has been successfully tested with the following software: Chiploader, MMC Flasher, Multiflasher, PCM Flash, Toyota Techstream and many others.
NB! We do NOT sell clone tools. This Openport is the original product of Tactrix Inc. Every customer is guaranteed to get all the updates including beta and technical support.
