FID: 70, 72, 73, 74, 77, 88, 93, 104, 368

Module for reading and writing through CAN-bus by diagnostic OBD2 plug ECUs used in petrol Kia and Hyundai vehicles.
 

Kefico CPEGD2.20.1/CPGDSH2.26.1 (FID: 70)

Supported Kefico CPEGD2.20.1 and CPGDSH2.26.1 ECUs are based on MCU Infineon Tricore TC1782 with internal flash memory 2.5Mb.

Allows reading and writing calibration area through CAN-bus with checksum correction. Recovery is possible from any state.
 

Bosch ME(G)17.9.1x (FID: 72)

ECU series Bosch ME(G)17.9.11/12/13 is based on MCU Infineon Tricore TC1762 with internal flash memory 1.46Mb.

Allows reading and writing FullFlash through CAN-bus with checksum correction.

Supported vehicles:
Kia/Hyundai 1.0-1.6 MPI/DOHC
 

Bosch ME(G)17.9.21 (FID: 74)

ECU series Bosch ME(G)17.9.21 is based on MCU Infineon Tricore TC1724 with internal flash memory 1.5Mb.

Allows reading and writing FullFlash through CAN-bus with checksum correction.
 

Bosch ME(D)(G)17.9.8 (FID: 73)

ECU series Bosch ME(D)(G)17.9.8 is based on MCU Infineon Tricore TC1767 with internal flash memory 2.0Mb.

Allows reading and writing FullFlash through CAN-bus with checksum correction.
 

Siemens SIM2K-47 (FID: 88)

ECU Siemens SIM2K-47 is based on MCU С167 with external flash memory 512Kb.

Allows reading and writing FullFlash through CAN-bus with checksum correction.
 

Siemens SIM2K-24x (FID: 93)

ECU series Siemens SIM2K-240/241/242/245 is based on MCU Infineon Tricore TC1767 with internal flash memory 2Mb.

Allows reading and writing FullFlash through CAN-bus with checksum correction.
 

Siemens SIM2K-141/341 (FID: 104)

ECU series Siemens SIM2K-141/341 is based on MCU Motorola MPC561 with external flash memory 2Mb.

Allows FullFlash reading and writing of calibration area through CAN-bus with checksum correction.
 

Siemens SIM2K-141.1 (FID: 144)

ECU series Siemens SIM2K-141.1 is based on MCU Motorola MPC563 with external flash with total memory size 2.5Mb.

Allows virtual reading and writing through CAN-bus with checksum correction.
 

Delphi MT86 (FID: 77)

ECU Delphi MT86 is based on Tricore TC1766 with internal flash memory 1.46Mb.

Allows reading and writing calibration area through CAN-bus with checksum correction.
 

Kefico M(E)(G)7.9.8 (FID: 368)

ECU Kefico M(E)(G)7.9.8 is based on ST10F275 with internal flash memory 832Kb.

Allows BSL reading/Virtual reading and writing calibration area through CAN-bus with checksum correction.