MD1CE100/MD1CE868/WISE10A (SHACMAN/HOWO)

Designed for chip tuning of vehicles equipped with MD1 ECUs (SHACMAN/HOWO). These ECUs are installed on MAZ, SHACMAN, and HOWO vehicles.

A 24V J2534 adapter is required to work with these ECUs.

Reading and programming of FLASH memory is supported via the controller's internal software (a method requiring no physical modification of the ECU). To perform operations on the vehicle via the CAN-1 bus (Pin 1: CAN-H; Pin 9: CAN-L), use a CAN2CAN adapter.